How to measure vibration with ATO vibration meter?


ATO vibration meter is portable and compact portable vibration meter. It is a rechargeable, simple and convenient for use, and has different vibration frequency selection with two probes, the short one and the long one, thus which is applied for different applications. With backlight LCD display, it is easy for user to get the readings.

The vibration meter can be used to measure the acceleration, velocity and displacement and widely applied for machinery, motors, bearings and other equipment. due to its the simple operation, this handheld vibration meter make it simple to monitor the machine vibration and make sure the machine runs smoothly.

In this video, ATO will tell you how to use this vibration meter and measure the vibration of a motor. It is so easy. Don't believe? Play the video.

Comments

Post a Comment

Popular posts from this blog

How to Test a Solenoid Valve?

Image
Solenoids are found in almost all electrical appliances, from electronic door locks to the more complex machines. They are made of thin wires coiled around each other, and when current is applied to it, it produces magnetic fields for valves and switches. There are several ways to snub the spike, and one of the ways is application of a diode across the coil, reverse biased against the current supply. This diode is often called a flywheel diode, and it provides the path for the current in the coil when the solenoid is switched off - thus eliminating completely the voltage surge. One of the drawbacks of this arrangement is the increased valve switch-off time, but when the switching speed is not an issue - this is a cheap and reliable solution to protect the circuitry against the spike. If you want to know more about coil transient voltage suppression - you can easily find more detailed information online. Few things shouldn’t be omitted before going into the full test on the solenoi...
Read more

Wiring BLDC Motor with Controller

Image
To understand why a BLDC motor is so effective, it's important to have a good understanding of how it works. There are actually two different types, with different benefits and drawbacks. While either one will probably be effective for most jobs, you may wish to familiarize yourself with both types, just in case one would be more appropriate for your project or application than the other. BLDC motors are often preferred in motion-control applications as their benefits outweigh potentially higher costs. When it comes to energy-, maintenance- and downtime-related costs, brushless DC motors may cost less than brush types in some applications. Brushless DC motors come in two varieties, "sensored" and sensorless. The sensored motors include Hall-effect sensors that respond to the magnets on the motor's core. As a result, the controller can determine the position of the rotor from the sensor signals. Thus when the controller starts the motor it decides which coils to e...
Read more

What is a Wind Turbine Made of?

Image
The ATO small wind turbine adopts a breeze starting design in the process of operation. The low wind speed series of wind turbines in the breeze environment have increased the effective annual power generation of wind turbines with an equivalent wind wheel diameter by more than 60%. Small wind turbines use three-phase permanent magnet synchronous wind turbines with high efficiency and small starting resistance torque. The motor insulation level is H-level insulation. The new intelligent controller monitors the operation of wind turbines in real time and adopts MPPT (Automatic Power Tracking) charging method, which improves the charging efficiency by 30% and truly realizes breeze power generation. ATO wind turbine is made of glass nylon fiber composite material, which can cope with various complicated wind conditions and efficiently and continuously convert wind energy into electricity. The tail rudder can respond flexibly to changes in wind and direction to improve power genera...
Read more